Rope Rescue/Equipment/Need/O ring
From PCSAR
(→Products) |
(→Yates 7800 Anchor Ring) |
||
| Line 9: | Line 9: | ||
Rigging collection ring useful for many rigging and rescue applications. Drop forged alloy steel. | Rigging collection ring useful for many rigging and rescue applications. Drop forged alloy steel. | ||
| - | + | * "Large" | |
| - | * Large | + | |
* Strength 10,000 lbf/44kN, | * Strength 10,000 lbf/44kN, | ||
* 1/2 inch | * 1/2 inch | ||
| Line 18: | Line 17: | ||
* http://yatesgear.com/en/copy-of-1012-mini-rigger | * http://yatesgear.com/en/copy-of-1012-mini-rigger | ||
** SKU: 7800 | ** SKU: 7800 | ||
| - | ** US$14.00 | + | ** US$14.00 (2015-09-17) |
=== Forged Steel MPA O-Ring === | === Forged Steel MPA O-Ring === | ||
Revision as of 03:06, 18 September 2015
Contents |
Requirements
- 2 steel o-rings for MAP @ ~$20 : $40
- large. Needs to accommodate 2 ropes and 5 carabiners
- MBS: 20kN, prefer much stronger if used as single point of failure
Products
Yates 7800 Anchor Ring
Rigging collection ring useful for many rigging and rescue applications. Drop forged alloy steel.
- "Large"
- Strength 10,000 lbf/44kN,
- 1/2 inch
- 3 inch diameter ID
- 4.00 inch diameter OD.
- http://yatesgear.com/en/copy-of-1012-mini-rigger
- SKU: 7800
- US$14.00 (2015-09-17)
Forged Steel MPA O-Ring
This is a bombproof forged steel ring commonly used for gathering a litter spider.
Perfect for any multi-directional loading situation.
- Breaking strength: 45 kN (10,000 Ibf).
- Weight: 265 g (9 oz).
- Inside Diameter: 3".
- http://catalogue.carletonrescue.com/do/ppa/456/Forged_Steel_MPA_O-Ring.html
- Call for pricing. Canadian
Discounted
SMC Descending Ring
- discounted: too weak
Product Number: 1410-117 Made in USA
Weight: 11g
Strength is 14.kN. Ring is rolled (not welded). 3.8cm (1.5in.) inside diameter.
An aluminum ring that facilitates getting your rope back after rappelling. It’s cheap enough to leave behind, and light (so you can carry a bundle for alpine routes).
Fixe Descending Ring
- discounted: too small
- Weight: 95g
- Rated at 50kn / 12,500lbs.
- Inner Diameter - 1 3/8"
- Outer Diameter - 2 1/8"
- 10mm rod stock
- Made in Spain
This ring is rated to a stout 50kN. It is made of stainless steel and works well for setting up durable rappel stations or lowering stations. Connect to hangers via maillons, chain, and so on, making sure all units are stainless steel to prevent galvanic corrosion. The steel wears longer but is heavier, so for alpine rap stations take along aluminum ones.
"It is large enough to put two carabiners and a rope through"
- http://www.mec.ca/product/4007-356/fixe-descending-ring/?No=120&h=10+50001+50019&f=10+50001+50019
- Product Number: 4007-356
- CAD$4.60 (2015-09-17)
