Rope Rescue/Equipment/Need/I-beam rigging clamps
From PCSAR
(Difference between revisions)
| Line 1: | Line 1: | ||
I-beam rigging clamps | I-beam rigging clamps | ||
* for training at Fire Hall | * for training at Fire Hall | ||
| - | ** sloped I-beams 4 inches wide | + | ** sloped I-beams, flange 4 inches wide |
*** '''need to determine flange thickness''' | *** '''need to determine flange thickness''' | ||
*** '''determine slope angle''' | *** '''determine slope angle''' | ||
| - | ** horizontal I-beams approx 7-8 inches wide | + | ** horizontal I-beams, flange approx 7-8 inches wide |
*** '''need to determine flange thickness''' | *** '''need to determine flange thickness''' | ||
| + | *** '''more accurately measure flange width''' | ||
* requirements: | * requirements: | ||
** adjustable from 4 to 8 inches | ** adjustable from 4 to 8 inches | ||
Revision as of 15:16, 19 March 2011
I-beam rigging clamps
- for training at Fire Hall
- sloped I-beams, flange 4 inches wide
- need to determine flange thickness
- determine slope angle
- horizontal I-beams, flange approx 7-8 inches wide
- need to determine flange thickness
- more accurately measure flange width
- sloped I-beams, flange 4 inches wide
- requirements:
- adjustable from 4 to 8 inches
- placeable on sloping I-beam
- non-rolling
- MBS: 40 kN
- 2 person load, SSSF, pulley at top
- = 8993 lbf
possible products:
- General Clamp Industries
- http://www.superclamp.com/
- GCI Fixed-Jaw Adjustable Girder Clamp
- For use at up to 15° from, vertical
- Approved for Personnel tie-off use*
- picture
- http://www.superclamp.com/default.asp?ID=12
- model SX3
- 11,200 lbf
- 3" - 7.5" flange
- might not fit larger I-beam
- GCI Swivel-Jaw Adjustable Girder Clamp
- For use at up to 15° from vertical
- Approved for Personnel tie-off use*
- picture
- http://www.superclamp.com/default.asp?ID=13
- Tractel
- http://www.tractel.com/us/home.php
- Corso Beam Clamp
- http://www.tractel.com/us/series.php?id_serie=73
- http://www.tractel.com/files/126564497571957.pdf
- multiple sizes
- This anchorage is designed to fit I-beams from 3 to 8.25 inches. Simple installation, removable. Meets ANSI, CSA, and OSHA 5400lbs (24kN) anchorage requirements.
- one person rated.
- 24kN should be sufficient for 2 person load at rescue SSSF because not weakened by knot.
- http://www.ahsrescue.com/p-1223-pmi-tractel-beam-clamp.aspx
- http://shop.pmirope.com/technical-hardware/index.aspx?pageID=43&productID=333&productMasterID=333
- http://www.torqhoist.com/show_unique_product.php?product_id=12
- FallTech
- http://www.falltech.com/
- http://www.falltech.com/subCat.asp?subCatID=36
- FallTech 7489 Vertical Beam Clamp
- Fits Beams from 2-1/2" - 12" Wide and up to 1-1/2" Flange Thickness.
- Ideal for Vertical or Horizontal I-Beam Structures.
- Rated at over 5,000 lbs.
- Meets OSHA and ANSI Requirements.
- http://www.falltech.com/productLS.asp?prodID=265
- http://www.westernsafety.com/falltech/falltech08pg3.html
- Reliance Fall Protection
- http://www.relsafe.com/
- 3089 Adjustable Width Beam Anchor
- 3096 Adjustable Width Sliding Beam Anchor
- 3098 Adjustable Width Beam Anchor
- 2 fall arrest links
- rated for sloped I-beams
- http://www.relsafe.com/ProductDetails.aspx?guid=afa7f5cc-699f-401d-81b3-356d5b4c3a73&pid=908&sourceUrl=ProductsByCategory.aspx%3fcategoryId%3d100%26pg%3d0
- 3093 HLL Anchor Clamp
- MBS 14,500 lb
- but manual says 6,000 lb
- http://www.relsafe.com/ProductDetails.aspx?guid=e8b2c0bf-5765-42c8-b21b-acf04fc19ae5&pid=561&sourceUrl=ProductsByCategory.aspx%3fcategoryId%3d100%26pg%3d2
- MBS 14,500 lb
- LockJaw Remote Beam Grip Clamp
- Beam Clamp (unclear manufacturer)
- 3 - 9" flange widths
- WLL, Personal 2,000 lbf.
- http://www.rescuetech1.com/beamclamp.aspx
suitability uncertain:
Welded ring
Not suitable:
- rigging chains (require horizontal beam)
- http://www.polarfocus.com/view.php?RBC
- "level beams only"
- All Material Handling (AMH)
- FallTech
- FallTech 7411 Ratcheting Beam Clamp
- Fits Beams from 4" - 12" Wide and up to 1" Flange Thickness.
- Ideal for Horizontal I-Beam Structures.
- Rated at over 5,000 lbs .
- Meets the Requirements of OSHA 1926 and ANSI Z359.
- http://www.falltech.com/productLS.asp?prodID=165
- http://www.westernsafety.com/falltech/falltech08pg3.html
- manufacturer unclear on sloped used
- FallTech 7485 Portable Beam Clamp
- Fits Beams from 3-1/2" - 12" Wide and up to 1-1/8" Flange Thickness.
- Rated at over 5,000 lbs.
- Meets the Requirements of OSHA 1926 and ANSI Z359.
- http://www.falltech.com/productLS.asp?prodID=263
- http://www.westernsafety.com/falltech/falltech08pg3.html
- manufacturer unclear on sloped used
- FallTech 7486 Portable Beam Clamp
- Fits Beams from 3-1/2" - 18" Wide and up to 1-1/8" Flange Thickness.
- Ideal for Horizontal I-Beam Structures.
- Rated at over 5,000 lbs.
- Meets OSHA and ANSI Requirements.
- http://www.falltech.com/productLS.asp?prodID=264
- http://www.westernsafety.com/falltech/falltech08pg3.html
- manufacturer unclear on sloped used
- FallTech 7487 Stationary Beam Clamp
- Fits Beams from 4" -12" Wide and up to 1-1/8" Flange Thickness.
- Ideal for Horizontal I-Beam Structures.
- Rated at over 5,000 lbs.
- Meets the Requirements of OSHA 1926 and ANSI Z359.
- http://www.falltech.com/productLS.asp?prodID=266
- http://www.westernsafety.com/falltech/falltech08pg3.html
- manufacturer unclear on sloped used
- FallTech 7488
- FallTech 7411 Ratcheting Beam Clamp
- General Clamp Industries
- GCI Universal Superclamp
- min flange size: 6 inch
- Can be Loaded at Any Angle
- This model is designed to be used at full rated capacity at angles up to 90° in a 360° radius.
- Approved for Personnel tie-off use*
- picture
- http://www.superclamp.com/default.asp?ID=10
- http://www.lamcoinc.com/beamclamp.html
- GCI Universal Superclamp
