Rope Rescue/Equipment/Need/I-beam rigging clamps
From PCSAR
(Difference between revisions)
(→Not suitable) |
(→Not suitable) |
||
| Line 139: | Line 139: | ||
* General Clamp Industries | * General Clamp Industries | ||
** GCI Universal Superclamp | ** GCI Universal Superclamp | ||
| - | *** | + | *** ''min flange size: 6 inch'' |
*** Can be Loaded at Any Angle | *** Can be Loaded at Any Angle | ||
**** This model is designed to be used at full rated capacity at angles up to 90° in a 360° radius. | **** This model is designed to be used at full rated capacity at angles up to 90° in a 360° radius. | ||
Revision as of 17:05, 19 March 2011
Contents |
Need
I-beam rigging clamps
- for training at Fire Hall
- sloped I-beams, flange 4 inches wide
- need to determine flange thickness
- determine slope angle
- horizontal I-beams, flange approx 7-8 inches wide
- need to determine flange thickness
- more accurately measure flange width
- sloped I-beams, flange 4 inches wide
Requirements
- adjustable from 4 to 8 inches
- placeable on sloping I-beam
- non-rolling
- MBS: 40 kN
- 2 person load, SSSF, pulley at top
- = 8993 lbf
- WLL is not the same as MBS. It has a Design Factor (DF) built in for safety. That factor is not documented; OSHA talks about factor 2 in other parts of its standard. But without specification, we assume that the WLL is only negligibly less than MBS.
Product options
Potentially suitable
- General Clamp Industries
- http://www.superclamp.com/
- GCI Swivel-Jaw Adjustable Girder Clamp
- For use at up to 15° from vertical
- Approved for Personnel tie-off use*
- picture
- http://www.superclamp.com/default.asp?ID=13
- 3.5" - 12" flange
- models S6 and S6A
- WLL: 11,200 lb
- model S11
- WLL: 22,400 lb
- models S6 and S6A
- GCI Fixed-Jaw Adjustable Girder Clamp
- For use at up to 15° from, vertical
- Approved for Personnel tie-off use*
- picture
- http://www.superclamp.com/default.asp?ID=12
- model SX3
- WLL: 11,200 lb
- 3" - 7.5" flange
- might not fit larger I-beam
- Tractel
- http://www.tractel.com/us/home.php
- Corso Beam Clamp
- http://www.tractel.com/us/series.php?id_serie=73
- http://www.tractel.com/files/126564497571957.pdf
- http://www.ahsrescue.com/p-1223-pmi-tractel-beam-clamp.aspx
- http://shop.pmirope.com/technical-hardware/index.aspx?pageID=43&productID=333&productMasterID=333
- http://www.torqhoist.com/show_unique_product.php?product_id=12
- This anchorage is designed to fit I-beams from 3 to 8.25 inches. Simple installation, removable. Meets ANSI, CSA, and OSHA 5400lbs (24kN) anchorage requirements.
- Model Lt 5B
- 5 ton = 10,000 lb
- flange width: 2.9" - 8.7"
- Model Lt 10B
- 10 ton = 20,000 lb
- flange width: 3.5" - 8.7"
- Reliance Fall Protection
suitability uncertain
Welded ring
Not suitable
- rigging chains (require horizontal beam)
- http://www.polarfocus.com/view.php?RBC
- "level beams only"
- All Material Handling (AMH)
- FallTech
- http://www.falltech.com/
- http://www.falltech.com/subCat.asp?subCatID=36
- FallTech 7489 Vertical Beam Clamp
- Fits Beams from 2-1/2" - 12" Wide and up to 1-1/2" Flange Thickness.
- Ideal for Vertical or Horizontal I-Beam Structures.
- Rated at over 5,000 lbs.
- no detailed strength rating
- Meets OSHA and ANSI Requirements.
- http://www.falltech.com/productLS.asp?prodID=265
- http://www.westernsafety.com/falltech/falltech08pg3.html
- FallTech 7411 Ratcheting Beam Clamp
- Fits Beams from 4" - 12" Wide and up to 1" Flange Thickness.
- Ideal for Horizontal I-Beam Structures.
- Rated at over 5,000 lbs .
- Meets the Requirements of OSHA 1926 and ANSI Z359.
- http://www.falltech.com/productLS.asp?prodID=165
- http://www.westernsafety.com/falltech/falltech08pg3.html
- manufacturer unclear on sloped used
- FallTech 7485 Portable Beam Clamp
- Fits Beams from 3-1/2" - 12" Wide and up to 1-1/8" Flange Thickness.
- Rated at over 5,000 lbs.
- Meets the Requirements of OSHA 1926 and ANSI Z359.
- http://www.falltech.com/productLS.asp?prodID=263
- http://www.westernsafety.com/falltech/falltech08pg3.html
- manufacturer unclear on sloped used
- FallTech 7486 Portable Beam Clamp
- Fits Beams from 3-1/2" - 18" Wide and up to 1-1/8" Flange Thickness.
- Ideal for Horizontal I-Beam Structures.
- Rated at over 5,000 lbs.
- Meets OSHA and ANSI Requirements.
- http://www.falltech.com/productLS.asp?prodID=264
- http://www.westernsafety.com/falltech/falltech08pg3.html
- manufacturer unclear on sloped used
- FallTech 7487 Stationary Beam Clamp
- Fits Beams from 4" -12" Wide and up to 1-1/8" Flange Thickness.
- Ideal for Horizontal I-Beam Structures.
- Rated at over 5,000 lbs.
- Meets the Requirements of OSHA 1926 and ANSI Z359.
- http://www.falltech.com/productLS.asp?prodID=266
- http://www.westernsafety.com/falltech/falltech08pg3.html
- manufacturer unclear on sloped used
- FallTech 7488
- General Clamp Industries
- GCI Universal Superclamp
- min flange size: 6 inch
- Can be Loaded at Any Angle
- This model is designed to be used at full rated capacity at angles up to 90° in a 360° radius.
- Approved for Personnel tie-off use*
- picture
- http://www.superclamp.com/default.asp?ID=10
- http://www.lamcoinc.com/beamclamp.html
- GCI Universal Superclamp
- Reliance Fall Protection
- http://www.relsafe.com/
- 3089 Adjustable Width Beam Anchor
- 3096 Adjustable Width Sliding Beam Anchor
- http://www.relsafe.com/ProductDetails.aspx?guid=ac7bd5ec-4efd-4d1f-809b-040b9862f8fc&pid=881&sourceUrl=ProductsByCategory.aspx%3fcategoryId%3d100%26pg%3d0
- flange width: 3.75" - 12.25"
- but manual says: 5" - 15"
- maximum load: 5000lb
- 3098 Adjustable Width Beam Anchor
- 2 fall arrest links
- rated for sloped I-beams
- http://www.relsafe.com/ProductDetails.aspx?guid=afa7f5cc-699f-401d-81b3-356d5b4c3a73&pid=908&sourceUrl=ProductsByCategory.aspx%3fcategoryId%3d100%26pg%3d0
- wrong manual on web page; cannot determine strength rating
- LockJaw Remote Beam Grip Clamp
- Beam Clamp (unclear manufacturer)
- 3 - 9" flange widths
- WLL, Personal 2,000 lbf.
- WLL, Equipment 4,000 lbf.
- http://www.rescuetech1.com/beamclamp.aspx
