Rope Rescue/Equipment/Need/O ring

From PCSAR

(Difference between revisions)
Jump to: navigation, search
(→Fixe Descending Ring)
(→Fixe Descending Ring)
Line 9: Line 9:
** 45 kN
** 45 kN
=== Fixe Descending Ring ===
=== Fixe Descending Ring ===
-
* 50 kN
 
* Weight: 95g
* Weight: 95g
-
 
+
* Rated at 50kn / 12,500lbs.
-
Made in Spain
+
* Inner Diameter - 1 3/8"
 +
* Outer Diameter - 2 1/8"
 +
* 10mm rod stock
 +
* Made in Spain
This ring is rated to a stout 50kN. It is made of stainless steel and works well for setting up durable rappel stations or lowering stations. Connect to hangers via maillons, chain, and so on, making sure all units are stainless steel to prevent galvanic corrosion. The steel wears longer but is heavier, so for alpine rap stations take along aluminum ones.
This ring is rated to a stout 50kN. It is made of stainless steel and works well for setting up durable rappel stations or lowering stations. Connect to hangers via maillons, chain, and so on, making sure all units are stainless steel to prevent galvanic corrosion. The steel wears longer but is heavier, so for alpine rap stations take along aluminum ones.

Revision as of 02:37, 18 September 2015

Requirements

  • 2 steel o-rings for MAP @ ~$20 : $40

Products

Fixe Descending Ring

  • Weight: 95g
  • Rated at 50kn / 12,500lbs.
  • Inner Diameter - 1 3/8"
  • Outer Diameter - 2 1/8"
  • 10mm rod stock
  • Made in Spain

This ring is rated to a stout 50kN. It is made of stainless steel and works well for setting up durable rappel stations or lowering stations. Connect to hangers via maillons, chain, and so on, making sure all units are stainless steel to prevent galvanic corrosion. The steel wears longer but is heavier, so for alpine rap stations take along aluminum ones.

"It is large enough to put two carabiners and a rope through"

Retrieved from "http://pcsar.dyndns.org/mediawiki/index.php/Rope_Rescue/Equipment/Need/O_ring"
Personal tools