Rope Rescue/Equipment/Need/I-beam rigging clamps

(Difference between revisions)

Revision as of 12:26, 19 March 2011

I-beam rigging clamps

for training at Fire Hall
- slanted I-beams 4 inches wide
- horizontal I-beams approx 7-8 inches wide
requirements yet to be defined

possible products:

Universal SUPERCLAMP
- Can be Loaded at Any Angle
- Approved for Personnel Anchoring (tie-off)
- http://www.lamcoinc.com/beamclamp.html

Beam Clamp
- 3 - 9" flange widths
- WLL, Personal 2,000 lbf.
- http://www.rescuetech1.com/beamclamp.aspx

PMI Tractel Beam Clamp
- This anchorage is designed to fit I-beams from 3 to 8.25 inches. Simple installation, removable. Meets ANSI, CSA, and OSHA 5400lbs (24kN) anchorage requirements.
- Fallstop Beam Clamp, one person rated.
- 24kN not high enough
- http://www.ahsrescue.com/p-1223-pmi-tractel-beam-clamp.aspx

@@ Line 4: / Line 4: @@
 ** horizontal I-beams approx 7-8 inches wide
 * requirements yet to be defined
+possible products:
+* Universal SUPERCLAMP
+** Can be Loaded at Any Angle
+** Approved for Personnel Anchoring (tie-off)
+** http://www.lamcoinc.com/beamclamp.html
+* Beam Clamp
+** 3 - 9" flange widths
+** WLL, Personal   2,000 lbf.
+** http://www.rescuetech1.com/beamclamp.aspx
+* PMI Tractel Beam Clamp
+** This anchorage is designed to fit I-beams from 3 to 8.25 inches. Simple installation, removable. Meets ANSI, CSA, and OSHA 5400lbs (24kN) anchorage requirements.
+** Fallstop Beam Clamp, one person rated.
+** ''24kN not high enough''
+** http://www.ahsrescue.com/p-1223-pmi-tractel-beam-clamp.aspx
 * possible sources:
 ** possibly live load rated:
-*** http://www.rescuetech1.com/beamclamp.aspx
-*** http://www.lamcoinc.com/beamclamp.html
-*** http://www.ahsrescue.com/p-1223-pmi-tractel-beam-clamp.aspx
 *** http://shop.pmirope.com/technical-hardware/index.aspx?pageID=43&productID=114&productMasterID=114
 *** http://www.gravitec.com/equipment/anchors/reliance-lockjaw-remote-beam-grip-clamp/anc-re-3040-1/