Briefing Trailer/Operations

From PCSAR

These instructions are in a preliminary form. Please update them. They likely do not have all the information people will need.

Contents 1 Before leaving the firehall 1.1 Gather the keys 1.2 Inspect 2 To do

Before leaving the firehall

Gather the keys

• The keys to the trailer are in the SAR cabinet upstairs in the firehall
  • There are three keys on the ring.
    • black plastic handle and a red mark is for the rear door
    • black plastic handle and no red mark is for the front door
    • silver key is for the cubbyhole accessible from the outside at front from either side
• The key to the trailer hitch is on a separate key chain. I found it in the Mobile Command Post. This is not a very good place for it, as the MCP may be in a different place when the trailer needs to be moved. If there's not a duplicate in the firehall cabinet, we may move it there.

Inspect

Walk around the trailer looking for any problems

• check for anything in the way
• note that there should be a block between the tires
• check the conditions of the tires
• remove the hitch lock and place inside the trailer. Keep the key with the hitch lock

Check inside to see if anything needs to be secured for movement.

To do

• verify we have extra copies of keys
  • 3 different keys to trailer
  • hitch lock keys