Editing Mobile Command Post/Incident Set Up

From PCSAR

Jump to: navigation, search

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Current revision Your text
Line 116: Line 116:
'''Cell Phone Booster'''.
'''Cell Phone Booster'''.
If in an area of weak cell phone signal, turn on the cell phone booster
If in an area of weak cell phone signal, turn on the cell phone booster
-
in the Mobile Command Post.
+
ith the Mobile Command Post.
-
The booster is powered on by plugging it into the round 12V vehicle power socket.
+
'''''How is this done?'''''
-
This socket is on the dividing wall between the front and back of the interior of the command post (on the driver's side at about head height).
+
-
The power cord to the booster hangs beside the socket.
+
-
There is a small switch on the cord and a red LED that should turn on.
+
-
The booster's internal antenna is in the clear plastic file holder mounted beside the socket.
+
-
Cell phones will work best if place adjacent to or near this antenna.
+
{{checkbox}}
{{checkbox}}

Please note that all contributions to PCSAR are considered to be released under the Attribution-Share Alike 3.0 Unported (see PCSAR:Copyrights for details). If you don't want your writing to be edited mercilessly and redistributed at will, then don't submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. DO NOT SUBMIT COPYRIGHTED WORK WITHOUT PERMISSION!


Cancel | Editing help (opens in new window)

Templates used on this page:

Personal tools