Rope Rescue/Equipment/Inventory

From PCSAR

Revision as of 20:53, 4 May 2010

Webbing

Webbing should be cut to standardized lengths and colour coded by length.

From the PEP Team Member Manual, page 3-10:

• 3m - blue
• 5m - red
• 10m - yellow (but we substitute green if yellow not available)

Each piece of webbing should have its length marked at both ends. E.g. "3M". One end should be marked "PINCHER SAR" followed by a unique number.

• last used number: 9

The year of manufacture (or if unknown the earliest know year of history) should be marked on one end. The description of the webbing should be added below.

9 - lengths of 1" tubular webbing, as detailed below

• 2002-09-07 inventory 7 lengths after training

tubular webbing

• 2 – 1.5 m lengths: “Pincher SAR 1, 3”
• 1 – 2 m length: “Pincher SAR 2”
• Description: 24mm (1 inch), red with center black thread on alternate wafts on one side
• Notices:
• Strength: unknown
• Manufacturer:
• Model:
• Manufacture Date: unknown
• Acquired: 2000 MEC
• Retire by Date: undetermined
• History:

tubular webbing

• 1 – 2.5 m length: “Pincher SAR 4”
• 1 – 3 m length: “Pincher SAR 5”
• 1 – 4.5 m length: “Pincher SAR 6”
• 1 – 6.5 m length: “Pincher SAR 7”
• Description: 24mm (1 inch), royal blue with center black thread on alternate wafts on one side, 45 g/m
• Notices:
• Strength: 1815 kg tensile, milspec, spec 30462 103 68
• Manufacturer: Marricot Ind.
• Model:
• Manufacture Date: unknown
• Lot Number: 44518
• Acquired: 2000 MEC, part # 0406 4004959 048522-
• Price: $0.75/m
• Retire by Date: undetermined
• History: