Rope Rescue/Equipment/Need
From PCSAR
(Difference between revisions)
(→Sit harness) |
(→Sit harness) |
||
Line 56: | Line 56: | ||
* [http://www.petzl.com/en/pro/rescue-harnessess/falcon Petzl Falcon] | * [http://www.petzl.com/en/pro/rescue-harnessess/falcon Petzl Falcon] | ||
* [http://www.petzl.com/en/pro/rescue-harnessess/falcon-mountain Petzl Falcon Mountain] | * [http://www.petzl.com/en/pro/rescue-harnessess/falcon-mountain Petzl Falcon Mountain] | ||
+ | * [http://www.petzl.com/en/pro/rescue-harnessess/falcon-ascent Petzl Falcon Ascent] | ||
=== Chest harness === | === Chest harness === |
Revision as of 18:00, 8 February 2011
total: (including GST) $2335
Contents |
Immediate
immediate need: total: $450 with GST $475
Ropes
- 2 new ropes (ordered) total: ~$300
PMP
2 prusik minding pulleys @ ~$55 - $75 each = total ~$150
- SMC NFPA 2" Prusik Minding Pelley (Model # NFPA152700) preferred product
- 2 inch sheave, sealed bearings
- 179g
- 44 kN
- US$59.95 SMC
- US$57.00 Rescue Direct
- US$58.20 Rock N Rescue
- Petzl Prusik Minding Pulley (may be discontinued)
- up to 12.5mm rope, 2 inch sheave, sealed bearings
- 35 kN
- 335g
- CAD$67.00 MEC
- Petzl Prusik Minder
- 51mm sheave, sealed bearings
- 36 kN
- 295 g
- Petzl
- SMC NFPA 3" Prusik Minding Pulley (Model #: NFPA158000)
- up to 13mm rope, 2.5 inch tread, sealed bearings
- 38 kN
- 354g
- US$82.85 SMC
- $74.15 http://www.backcountrygear.com/catalog/climbdetail.cfm/SMC172
- CMI, 2" x 1/2" Single Prusik Minding Pulley - Steel Sideplates -Bushing
- 35 kN
- 437 g
- US$68.95 Rock N Rescue
- CMI, 3" x 1/2" Single Prusik Minding Pulley
- 71 kN
- 794 g
- US$98.10 Rock N Rescue
Vertical gear
vertical gear for 3 people: total: $1338 with GST $1405
Sit harness
3 sit harnesses @ ~$150 : total ~$450
Requirements:
- a low main attachment point, like a caving harness, to maximize throw when rope climbing
Vendors
- Carleton Rescue - lots of options
- MEC - lots of options
- Petzl - 3 rescue models
Products:
Chest harness
- 3 chest harnesses @ ~$50 : total ~$150
Croll
- 3 crolls @ $53 : total ~$165
Ascender
no need for handle as frogging system does not require pulling with hand
- 3 petzl basics @ $51 : total ~$153
Descender
Needs to support 10.5mm to 13mm (PCES) rope
- 3 mini brake bar racks @ ~$100 : total $300
D mallion
- 3 D mallions @ $15 : $45
Cow's tail
- 3 sets of cow's tail and foot loops @ $25 : $75
Accessories
accessories: total $70 with GST $75
Anchor plate
- anchor plate @ ~$30 : ~$30
O ring
- 2 steel o-rings for MAP @ ~$20 : $40
Individual gear
additional individual gear: total $357 with GST $380
- 6 sets of rope gloves @ $40 : $240
- 6 safety glasses @ $15 : $75
- 6 safety goggles @ $7 : $42
Future
future:
- commercial bridle
- standardize and simplify our range of carabiners
- modernize pulleys
- 5 single sheave 2" pulleys @ $100 : $500
- I-beam rigging clamps
- for training at Fire Hall
- requirements yet to be defined
- possible sources:
- possibly live load rated:
- http://www.rescuetech1.com/beamclamp.aspx
- http://www.lamcoinc.com/beamclamp.html
- http://www.ahsrescue.com/p-1223-pmi-tractel-beam-clamp.aspx
- http://shop.pmirope.com/technical-hardware/index.aspx?pageID=43&productID=114&productMasterID=114
- http://www.gravitec.com/equipment/anchors/reliance-lockjaw-remote-beam-grip-clamp/anc-re-3040-1/
- http://www.westernsafety.com/falltech/falltech08pg3.html
- rating not obvious:
- possibly live load rated: