Mobile Command Post/Cab
From PCSAR
(→Parking Brake) |
(→Parking) |
||
| Line 32: | Line 32: | ||
* Turn off the ignition | * Turn off the ignition | ||
* Put the Transmission in D (Drive). | * Put the Transmission in D (Drive). | ||
| + | == Refueling == | ||
| + | We refuel at Petrocan at the east end of Main Street. | ||
| + | The card to use the pumps is kept on the clipboard. | ||
Revision as of 21:20, 3 June 2017
Contents |
Keys
The key for the cab door is in the work area, immediately to the right as you enter, stored on a hook. There is a separate key for the cab door and the ignition (marked).
Checklist
There is a checklist on the passenger seat on clipboard. Use it.
Starting
The automatic transmission must be in "N" (Neutral) to start the vehicle. There is no "P" (Park).
Parking Brake
The parking brake is a large yellow square-handled control to the bottom right of the steering wheel. Push it in to release.
While the engine is running pull it to engage. It uses a hydraulic assist on the brakes. (Not sure I have the right terminology.) You may feel it push back on the brake pedal when you use it. A buzzer will sound if the parking brake is engaged while the engine is running. This is a reminder to release the parking brake.
Because the vehicle uses hydraulic assist, many people think that you require a Class 3 license to drive it. We've checked, and because it's a parking break, you only need Class 5.
Parking
When you park the vehicle,
- Pull out the yellow-handled Parking Brake while the ignition is running (you'll hear a buzz)
- Turn off the ignition
- Put the Transmission in D (Drive).
Refueling
We refuel at Petrocan at the east end of Main Street. The card to use the pumps is kept on the clipboard.
