Editing Photocopier

From PCSAR

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Model: HP Officejet 6500

I've put PCSAR's replacement photocopier/printer/fax in the old case
at the fire hall.  It's a fair bit lighter.

Functionality for our use should be straight forward.  The only
fiddly bit is taking of the lid to lay down maps.  You have to open
and then close it a bit to get the hinges to release.  When you have
the lid off, there's still the left edge that you can't hang over.
I practiced with a map and it's not bad -- just bend the map up
against that edge.

* [[PCSAR Doc-98 Printer/Photocopier]]

Selection:
* [[PhotocopierTask]]

See:
* [[User:Brett_Wuth/Running_Notes/2009-08#2009-08-30]]

== Maintenance ==
We need to test the printer once a month.  This will also prevent the ink from clogging.

# Follow the set up instructions per [[PCSAR Doc-98 Printer/Photocopier]], including printing the test page and photocopying it.
# Replace cartridges as necessary.  
# Report any problems.
# Verify have minimum supplies as per [[PCSAR Doc-98 Printer/Photocopier]] and contact [[Administrator]] to order extras.

* old printer: [[PCSAR Doc-99 Printer/Photocopier Maintenance]]

Please note that all contributions to PCSAR are considered to be released under the Attribution-Share Alike 3.0 Unported (see PCSAR:Copyrights for details). If you don't want your writing to be edited mercilessly and redistributed at will, then don't submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. DO NOT SUBMIT COPYRIGHTED WORK WITHOUT PERMISSION!

Summary:

Cancel | Editing help (opens in new window)

Retrieved from "http://pcsar.dyndns.org:8080/mediawiki/index.php/Photocopier"

Editing Photocopier

From PCSAR

Views

Personal tools

Navigation

Search

Toolbox

@@ Line 5: / Line 5: @@
 Functionality for our use should be straight forward.  The only
-fiddly bit is taking off the lid to lay down maps.  You have to open
+fiddly bit is taking of the lid to lay down maps.  You have to open
 and then close it a bit to get the hinges to release.  When you have
 the lid off, there's still the left edge that you can't hang over.