Rope Rescue/Equipment/Need/I-beam rigging clamps

From PCSAR

Jump to: navigation, search

Contents

Need

I-beam rigging clamps

  • for training at Fire Hall
    • sloped I-beams, flange 4 inches wide
      • need to determine flange thickness
      • determine slope angle
    • horizontal I-beams, flange approx 7-8 inches wide
      • need to determine flange thickness
      • more accurately measure flange width

Requirements

  • adjustable from 4 to 8 inches
  • placeable on sloping I-beam
    • non-rolling
  • MBS: 40 kN
    • 2 person load, SSSF, pulley at top
    • = 8993 lbf
    • WLL is not the same as MBS. It has a Design Factor (DF) built in for safety. That factor is not documented; OSHA talks about factor 2 in other parts of its standard. But without specification, we assume that the WLL is only negligibly less than MBS.

Product options

Potentially suitable




suitability uncertain

Welded ring


Not suitable




Personal tools